1.The default password for logging in to the web UI of the CPE is admin or 4GCPE@TD.
2.If the preceding two default passwords fail to be set, you can use Telnet to restore the factory settings or use the eOMC to restore the settings.
a.Telnet to the CPE, and run the restore command to restore the CPE to factory settings. After the CPE restarts, log in to 192.168.1.1. The password is admin or 4GCPE@TD.
b.Alternatively, if the CPE is connected to the eOMC, right-click the cpe in the topology view to restore the CPE to its factory settings
Forgets the login password of CPE （EG860）
Created: Jan 25, 2019 06:05:45Latest reply: Jan 26, 2019 07:06:21
1443
1
3
0
0
- x
- convention：
- Emotion(0)
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
