Forget V3 storage admin password

jors · Created Aug 16, 2019 11:14:13

Hi!

If you've ever changed the default password, maybe you can use the following method to recover it:

1. Log in to the storage array via the serial port using the following user name and password:

User name: _super_admin; password: Admin@revive

2. Log in to the storage array via the serial port:

Connect a PC to the serial port on the controller enclosure or disk enclosure using a serial cable.

Prepare the required parameters.

Baud rate: 115200

Query the serial port ID (Windows is used as an example). Choose Start > Run. Enter devmgmt.msc and click OK. In the DeviceManager window, click Ports (COM&LPT) to query the serial port ID.

Run the terminal software on the PC and set the related parameters. After the storage array has been successfully connected, go to the serial port mode.

After logging in to the storage array, run the initpasswd command to initialize the password. If password initialization is successful, the corresponding message is displayed.

stephen.xu · Created Aug 16, 2019 11:53:20

Hi, mike!

If you forgot the password of the admin, you can do as follows:

1. You can use _super_admin to log in to the CLI via a serial port.

The default password of the root administrator _super_admin is Admin@revive.

2. Run the initpasswd command to reset the password of the super administrator admin.

Storage:

_super_admin> initpasswd please input username:admin init admin passwd,wait a moment please... *****please enter new password for admin :***** *****please re-enter new password for admin :***** Init admin passwd succeeded

For details, you can refer here.

wissal · Created Aug 16, 2019 11:05:03

the default user name and password are admin and Admin@Storage respectively.

jors · Created Aug 16, 2019 11:11:05

have you ever changed your password？

jors · Created Aug 16, 2019 11:14:13

Hi!

If you've ever changed the default password, maybe you can use the following method to recover it:

1. Log in to the storage array via the serial port using the following user name and password:

User name: _super_admin; password: Admin@revive

2. Log in to the storage array via the serial port:

Connect a PC to the serial port on the controller enclosure or disk enclosure using a serial cable.

Prepare the required parameters.

Baud rate: 115200

Query the serial port ID (Windows is used as an example). Choose Start > Run. Enter devmgmt.msc and click OK. In the DeviceManager window, click Ports (COM&LPT) to query the serial port ID.

Run the terminal software on the PC and set the related parameters. After the storage array has been successfully connected, go to the serial port mode.

After logging in to the storage array, run the initpasswd command to initialize the password. If password initialization is successful, the corresponding message is displayed.

jors · Created Aug 16, 2019 11:15:06

for example:

Storage: _super_admin> initpasswd
init passwd, wait a moment please...
*****Please enter new password for admin :)*****

*****Please re-enter new password for admin :)*****

init admin's passwd succeed

stephen.xu · Created Aug 16, 2019 11:53:20

Hi, mike!

If you forgot the password of the admin, you can do as follows:

1. You can use _super_admin to log in to the CLI via a serial port.

The default password of the root administrator _super_admin is Admin@revive.

2. Run the initpasswd command to reset the password of the super administrator admin.

Storage:

_super_admin> initpasswd please input username:admin init admin passwd,wait a moment please... *****please enter new password for admin :***** *****please re-enter new password for admin :***** Init admin passwd succeeded

For details, you can refer here.

Forget V3 storage admin password

Best answer

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

Forget V3 storage admin password

Best answer

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers