For MA5200F providing WLAN services, how does it send AC NAME and user IP parame

View the author · Created Feb 18, 2016 18:26:03

Quote 1 #

Alarm Information
When a user opens WEB page for authentication, the system prompts it as illegal user

Handling Process

Send ACNAME and USERIP to WEB authentication server, and MA5200F must be with the following configurations:

1) NAS-SERIAL configured;

[MA5200F-aaa]nas-serialABCDEFG

2) EAP-SIM-PARAMETER enabled

[MA5200F-aaa-domain-test]eap-sim-parameter

3) Force WEB authentication to POST mode

[MA5200F-aaa-domain-default0]web-servermodepost

Root Cause

Check the configurations of MA5200F, and it is found that NAS-SERIAL is configured and WEB authentication is in POST mode, but EAP-SIM-PARAMETER is not enabled, resulting in that two parameters above are not sent to client in forced WEB authentication. So, the client does not send the relevant parameters to WEB authentication server during its authentication, and WEB authentication prompts it as illegal user, leading the authentication to failure.

View the author · Created May 3, 2020 20:22:33

grateful for the information

View the author · Created May 3, 2020 20:22:39

well explained

For MA5200F providing WLAN services, how does it send AC NAME and user IP parame

Quote 1 #

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

For MA5200F providing WLAN services, how does it send AC NAME and user IP parame

Quote 1 #

Third Party’s Trade Secret

My Followers