Got it

Huawei Enterprise Support Community

Community Forums Intelligent Collaboration

Fault occurred in IAD208E(M) when trying to register to CUCM 8.6.2

Created: Mar 30, 2016 19:09:34Latest reply: Mar 31, 2016 08:27:50 1652 1 0 0 0

Issue Description

Registration of a Huawei eSpace 7850 (R001C03SPC220) connected to Huawei IAD208E(M) (V300R001C07SPC700) failed on the CUCM 8.6.2. But registration of the eSpace 7850 alone, succeeded. Please see attached print screen of this case. On the trace, when registration failed the Authorization Digest Username is “7101” and it must have been “iad208”.

Alarm Information

IAD replied: IP/2.0 404 Not Found

x
convention：
Emotion(0)

Like (0) Dislike (0) Favorite(0) Report

 Previous: Failed to Pick Up a Call Within a Group Due to Lack of Rights

Next: 7950 sometimes cannot hear ring back tone when make a call



(0) (0)

^2#

Adamcolob Created Mar 31, 2016 08:27:50

Handling Process

1. Check IAD Sip Service Configuration/SIP Soft Parameter -> Authentication type = ID

2. Change the Authentication type to Name of two IP Phones SIP accounts

3. Verify registration status -> Successful

4. Do incoming and outgoing test calls -> Successful

5. Change the Authentication type to Name to all the SIP accounts configured on the IAD

Root Cause

1. Check SIP user settings on the CUCM -> OK!

2. Check Account settings on the IP Phone -> User name: 7101 Register name: iad208

3. Check IAD Sip Service Configuration/SIP Soft Parameter -> Authentication type = ID

4. Change the Authentication type to Name

5. Retry the registration test scenario -> Success

Solution

Suggestions

If on the SIP server, you configure the Authentication by UserName, in the IAD this means that in the Sip Service Configuration/SIP Soft Parameter -> Authentication type must be set to Name, not to ID. Use this setting to avoid failed registration of the IP Phones connected to the IAD.

x
convention：

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

Enterprise

Consumer

Corporate

Carriers

Fault occurred in IAD208E(M) when trying to register to CUCM 8.6.2

Third Party’s Trade Secret

My Followers