【FAQ】How to use the TE60 and do device control and shut down on the TE60 Web page

Hello, everyone. I want to share a EC product case. This type of problem often occurs during maintenance. How to use the TE60 and do device control and shut down on the TE60 Web page.

Background

Scenario : How to use the TE60 and do device control and shut down on the TE60 Web page which the EC solution of the on-premises or SP hosted model?

Version:  V600R019C00SPC600

Method introduction & Solution

Perform the following steps(EC solution):

Log in to the TE60 web and query the configure on the web page.

1. Log in to the TE60 web as the admin user.

2. Click Device Control Configuration. The page is displayed.

3.Choice disable or enable and click.

4.you can choice a type, shut down/restart/sleep function and click OK

Conclusion

The above scenarios are completed in the laboratory environment, only for case reference, not as the guidance basis for specific problems. If there are further questions. Please obtain the above log and send it to R&D or contact us with TAC support team.

Postscript

If you have any questions, welcome to reply and exchange, looking forward to your reply and good comments. thank you.