Enterprise

Community Forums Switches

FAQ - How to set the interval for collecting the traffic statistics on an interf

Created: Jan 4, 2013 09:31:17Latest reply: Jan 4, 2013 10:44:17 6001 1 0 0

S9300 - V2R1

By using the set flow-stat interval command to set the interval for collecting the traffic statistics on an interface, you can collect statistics and ***yze the packets according to your needs.

disp interf gig 0/0/0

............................................

Last 300 seconds input rate 1031504 bits/s, 163 packets/s

Last 300 seconds output rate 187464 bits/s, 132 packets/s

..............................................................................

Default value of the timer used to collect traffic statistics is 300 seconds.

[S9300-GigabitEthernet0/0/0]set flow-stat interval ?

INTEGER<30-300> set flow-stat interval time, from 30 seconds to 300 seconds

x
convention：

Helpful (0) Favorite(0) Report

StarOfWest Created Jan 4, 2013 10:44:17

result - timer was modified

Last 30 seconds input rate 876 bytes/sec, 9 packets/sec

Last 30 seconds output rate 496 bytes/sec, 5 packets/sec

x
convention：

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

Enterprise

Consumer

Corporate

Carriers

FAQ - How to set the interval for collecting the traffic statistics on an interf

Third Party’s Trade Secret