FAQ-How Do I Configure Port Isolation

Latest reply: May 22, 2015 11:37:19 1235 1 0 0

The port isolation feature isolates interfaces in a VLAN. To configure port isolation, run the port-isolate enable [ group group-id ] command in the interface view. For example, configure port isolation on GigabitEthernet1/0/1:

[Quidway] interface gigabitethernet1/0/1
[Quidway-GigabitEthernet1/0/1] port-isolate enable


To configure unidirectional port isolation, run the am isolate { interface-type interface-number }&<1-8> or am isolate interface-type interface-number1 [ to interface-number2 ] command in the interface view. For example, configure unidirectional isolation on GigabitEthernet1/0/1 and GigabitEthernet1/0/2:

[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] am isolate gigabitethernet 1/0/2

  • x
  • convention:

user_2790689
Created May 22, 2015 11:37:19 Helpful(0) Helpful(0)

Thank you.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login