FAQ-Does the GE Optical LPU of the S7700&S9700 Support 100M Optical Module?

Latest reply: Aug 24, 2015 09:41:45 1195 1 0 0

Yes, the S7700&S9700's GE optical LPU supports both 100M optical modules and 1000M optical modules.

When a 100M optical module is used, you must run the speed 100 command on the interface to set the interface rate to 100 Mbit/s.

When using a GE optical module, an interface works at 1000 Mbit/s by default. If auto-negotiation is enabled on the interface, the interface speed cannot be set to 100 Mbit/s. If auto-negotiation is disabled, you can run the speed 100 command to set the interface speed to 100 Mbit/s.

The 100M optical interface can only use the 100M optical module, and the default interface rate is 100M.

When two optical interfaces are interconnected, they must use the same type of optical module.


  • x
  • convention:

user_2790689
Created Aug 24, 2015 09:41:45 Helpful(0) Helpful(0)

Thank you.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login