Failet to reset console password

Latest reply: Aug 12, 2018 12:54:10 800 2 0 0
I have tried to reset the console password but while doing it i got stuck on follwing .
i have not configured telnet and SSH . 

Can anybody help me to solve this issue.  


Initializing CFcard ...................................................... done
Description data is valid in nvram area
Press Ctrl+B to enter boot menu : 3

Password : 


The default password is used now. Change the password.


             MAIN  MENU

     1. Boot with default mode
     2. Boot from Flash
     3. Boot from CFCard
     4. Enter serial submenu
     5. Enter Ethernet submenu
     6. Enter file system submenu
     7. Enter test submenu
     8. Enter password submenu
     9. Modify Flash description area
    10. Clear password for console user
    11. Reboot

Enter your choice(1-11):10    

Note: Clear password for console user? Yes or No(Y/N): y    

Clear password for console user successfully. 
Note: Choose "1. Boot with default mode" to boot, then set a new password


             MAIN  MENU

     1. Boot with default mode
     2. Boot from Flash
     3. Boot from CFCard
     4. Enter serial submenu
     5. Enter Ethernet submenu
     6. Enter file system submenu
     7. Enter test submenu
     8. Enter password submenu
     9. Modify Flash description area
    10. Clear password for console user
    11. Reboot

Enter your choice(1-11):10    

Note: Clear password for console user? Yes or No(Y/N): y    

Clear password for console user successfully. 
Note: Choose "1. Boot with default mode" to boot, then set a new password


             MAIN  MENU

     1. Boot with default mode
     2. Boot from Flash
     3. Boot from CFCard
     4. Enter serial submenu
     5. Enter Ethernet submenu
     6. Enter file system submenu
     7. Enter test submenu
     8. Enter password submenu
     9. Modify Flash description area
    10. Clear password for console user
    11. Reboot

Enter your choice(1-11):1    

Booting with default mode

Booting from "cfcard:/s7700-v200r010c00spc600.cc" ...
Info: Check signature, please wait...........
Loading ........................................................................
....................................... done
Boot from mcu's bin
Uncompressing ............................................................ done
Starting at 0x400000 ...

Vxworks Creation Date : Feb 24 2017, 06:24:37
Initializing Flash Module ................................................ done
Initializing Flash Flag .................................................. done

Initializing Port 0 MAC : f8-98-ef-af-a0-e0 .............................. done

Initializing Port 1 MAC : f8-98-ef-af-a0-e1 .............................. done
Attached TCP/IP interface to eth unit 0
                                       Attaching network interface lo0... done.

                                                                        dosChkLib : CLOCK_REALTIME is being reset to SUN AUG 12 15:03:52 2018
                                                                                                                                             V0
                                                                                                                                              0
                                                                                                                                              0
                                                                                                                                               

Initializing CFcard ...................................................... done
Initializing LanSwitch ................................................... done
para null: 0x0

Bootrom CRC Check test ............................... passed
Epld test ............................................ passed
Nvram DataBus test ................................... passed
Nvram AddressBus test ................................ passed
Battery test ......................................... passed
LanSwitch test ....................................... passed
THE PHY(0) test ...................................... passed
THE PHY(1) test ...................................... passed
THE PHY(2) test ...................................... passed

Disable manage port ...................................................... done

 DOPRA Library release version 1.6.9.900, by DOPRA.
 Copyright (C) 1999-2016 Huawei Technologies Co., Ltd.
 DOPRA is a registered trademark of Huawei Technologies Co., Ltd.
 This is commercial software; see the source for copying conditions.
 There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

CSS status : disable
Self board local slot ID : 4
Self board global slot ID : 4
Peer board local slot ID : 5
Peer board global slot ID : 5
Board role : slave
Total CMU number : 0
Setting interrupt hook .................................................... done
Registering ECM callback to driver ........................................ done

Sending a login packet to master mpu ...

VOS start begin ...
Board install driver ................................. Done

Competing CSS ............................................................. done
CSS role : none
System master slot ID in CSS : 5
System slave slot ID in CSS : 4

Chassis role : none
Initializing PDT ..................................... Done
Initializing PAT ..................................... Done

Creating LCSP task ........................................................ done
Getting the key of product ................................................ done
Trying to get the esn ...
Requesting self esn ....................................................... done
Getting self board esn .................................................... done
VRP root begin ...

VRP root end

CFG initialization begin ............................. done
CFM initialization begin ............................. done
CLI initialization begin ............................. done
Registering VRP all link command begin ............... Done
Creating task begin ...

Creating task end

Task initialization begin ...

Task initialization end


Cmd registering begin ...

Cmd registering end

AND IT STOPS... DOESNT SHOWS TO CHANDE THE PASSWORD AS SUGGESTED WHILE RESETING.

  • x
  • convention:

Created Aug 12, 2018 11:57:01 Helpful(1) Helpful(1)

F This post was last edited by KarimUC at 2018-08-12 12:44.
  • x
  • convention:

Created Aug 12, 2018 12:54:10 Helpful(1) Helpful(1)

Hello Sir

Once you reset console password, you don't need to change or use any password, you just need to connect your console cable and press enter after switch finish booting to enter switch CLI mode, then you can set new password as you need.

I hope it works for your...
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top