Hello, everyone!
This is a case of failure to install VMware ESXi 6.0 on RH2288H V3 using an SD card.
Problem Description
The following error message is displayed when the customer installs VMware ESXi 6.0 using an SD card:
Problem Analysis
Mount the toolkit and check the SD card. It is found that the file system partition in FAT32 format exists.
The SD card vendor confirms that the SD card has partitions and a file system before delivery. A 32 GB SD card uses the FAT32 file system. The SD card provided by the supplier is not only provided for Huawei. Many customers require that the SD card have partitions. Therefore, the SD card must have partitions before delivery.
Root Cause
The vendor confirms that the SD card has partitions and a file system before delivery. A 32 GB SD card uses the FAT32 file system.
Solution Description
Conclusion:
The vendor confirms that the SD card has partitions and a file system before delivery. A 32 GB SD card uses the FAT32 file system.
Solution:
Tentative Plan
Mount the toolkit tool and boot the system to the Linux CLI. Run the following ipmicmd -k "0f 00 30 93 DB 07 00 34 00 00 00 00 00 00 05 00 01 00 00 00 00" smi 0 command:
Solution: Format and verify the microSD card before delivery.
This is my solution, how about yours? Go ahead and share it with us!
