Failed to create logical fiber
Dears,
I can't create a logical fiber between R_VO and RC/TC ports of TN52DAPXF board, I get the error 38722
the NE is OSN9800
Thaks for your help.
- x
- convention：
- Emotion(0)
|
Dear friend! The VO port is usually connected to the IN port on the same amplifier module.
If the connection still fails, re-upload the NE configuration information and check whether it is occupied by another logical fiber. If yes, delete the logical fiber and then reconnect it. More information：https://forum.huawei.com/enterprise/en/how-to-delete-logical-fibers-of-otn/thread/689649-875 Thank you！ |
|
|
Dear friend! The VO port is usually connected to the IN port on the same amplifier module.
If the connection still fails, re-upload the NE configuration information and check whether it is occupied by another logical fiber. If yes, delete the logical fiber and then reconnect it. More information：https://forum.huawei.com/enterprise/en/how-to-delete-logical-fibers-of-otn/thread/689649-875 Thank you！ |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
