Failed to add the user to the local Permission Group

View the author · Created Dec 3, 2018 01:30:01

Goooooooooooooooooooooood,maybe you are rihgt!!! sometime i offen get the wrong address,
so,i should key the hole website adress?

View the author · Created Dec 17, 2018 11:46:04

very very nice to read
i thank you deep

View the author · Created Dec 28, 2018 11:34:12

I didn't get it. Is that mean that failed to access the AD server?

View the author · Created Jan 9, 2019 09:39:52

Very good one to read, i had another scenario that when creating a VM from template it gives errors indicating that there is a problem with rights and permissions however no problem at all with anything, after analyzing the issue we found out that the antivirus installed on the AD server prevents the newely created VM from communicating with the AD. once disabling it we could create template VM normally.

hust wanted to mention that.

View the author · Created Jan 13, 2019 09:44:49

Description:

When a linked clone template is created, an error occurs in the phase of Configuration, indicating that AddUserToVmPrivilegeGroup fails to be set

Cause Analysis:

If lengths of site domain names are inconsistent, for example, the complete site domain name is vdesktop.huawei.com and netBios name is fusionaccess, the program fails to locate the domain user (group) using the specified path.

Solution:

In the C:\Windows\System32\drivers\etc\hosts file, add a mapping between the IP address of the AD server and the domain anme prefix. For example, if the IP address is 192.168.1.1 and the domain name prefix is vdesktop, add 192.168.1.1 vdesktop. Then click Reinstall on the tool

Failed to add the user to the local Permission Group

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Failed to add the user to the local Permission Group

Third Party’s Trade Secret

My Followers