Failed to add server in esight

Hello

I have same issue.

Hi user!

Possible Causes
SNMP parameters are incorrect.
Procedure:
1. Log in to the server WebUI.
2. Check whether the SNMP parameters are correct.
Add a server using SNMPv1 or SNMPv2c.
The value of Port must be the same as the port number of the SNMP Agent service

The value of Read community must be the same as that of Read-Only Community.

The value of Write community must be the same as that of Read-Write Community.

Add a server using SNMPv3.

The value of Port must be the same as the port number of the SNMP Agent service

The value of Username must be the same as the user name for logging in to the server WebUI.

The value of Authentication protocol must be the same as that of SNMP V3 Authentication Protocol.

The value of Data encryption protocol must be the same as that of SNMP V3 Privacy Protocol

The value of Authentication password must be the same as that of Current User Password for user root and contains at least eight characters.

The value of Data encryption password must be the same as that of Current User Password for user root and contains at least eight characters.

Add the server again after modifying the SNMP parameters.

https://support.huawei.com/enterprise/en/doc/EDOC1000157217/7b76f0f0/faq-and-troubleshooting-typical-configuration-examples

Thanks!

hello，

    from the picture showing that the SNMP parameter not correct. you can follow the step to check it.

1、confirming the dock account password;

2、checking the protocol version and encryption method settings;

3、do ping test in esight portal IP address with ssh tool with server IP address;

4、confirming BMC trap server IP settings, consistent with network settings;

5、Add esight trap server IP；

The connection between the BMC and the Eight Trap server address. if it still not solved this issue suggest you can cretae ticket to support to have a remote session.

thanks!