Fail to install the FusionCube
Created: Jun 21, 2019 12:17:08Latest reply: Feb 26, 2022 03:37:27
979
11
0
0
0
Rewarded HiCoins：
0
(problem resolved)
I am deploying the FusionCube 3.2.1 now. but it hang in this stage, why? how to fix it?
- x
- convention：
Featured Answers
|
In addition, you can refer to the configuration file on FusionCube Builder VM inside.
Path: /opt/huawei/fcb/bin/server_type.xml. It has already listed all supported MezzCard models.  |
Johnny_Depp
Created Jun 21, 2019 14:15:46
(0)
(0)
Boreas, do you know when Huawei team plan to support this MZ52X series in Cube scenario?
Boreas
Reply Johnny_Depp Created Jun 22, 2019 06:23:34
(0)
(0)
Sorry, as i known, there was no exact date to support the MZ52. however, if you wanted to get a perfect experience from FusionCube product, you'd better to contact the Huawei local office. they will provide you a standard FusionCube scheme. |
All Answers
|
Hello,
Below the solution  solution  Thanks
|
Johnny_Depp
Created Jun 21, 2019 12:53:35
(0)
(0)
Hi, I have set the Raid 1 virtual disk group as the OS disk. and active it as the boot device. Now via KVM console, I saw the OS has booted up. 
wissal
Reply Johnny_Depp Created Jun 21, 2019 13:50:38
(0)
(0)
Hi Johnny_Depp, Please confirm if your issue is solved. Thanks |
|
|
Johnny_Depp
Created Jun 21, 2019 13:04:25
(0)
(0)
Hi, yeah, These physical servers were not from the standard Huawei FusionCube scheme. I just chose some idle physical from My datacenter to deploy FusionCube. My V5 blade is equipped the MZ522, My switch module is CX320. and I have referred guide to initialize the switch module. all is smooth before 50% process. but it hang in 65%. Any good idea?
Boreas
Reply Johnny_Depp Created Jun 21, 2019 13:43:23
(0)
(0)
HI Sir, unfortunately. After I queried the compatibility list of FusionCube, for E9000 chassis server, your MezzCard 522 was not in the list. so you may choose other support device to deploy the FusionCube. these Mezz card are in compatibility list: MZ611, MZ612, MZ620 MZ510, MZ512 MZ310 MZ312. |
|
In addition, you can refer to the configuration file on FusionCube Builder VM inside.
Path: /opt/huawei/fcb/bin/server_type.xml. It has already listed all supported MezzCard models. |
Johnny_Depp
Created Jun 21, 2019 14:15:46
(0)
(0)
Boreas, do you know when Huawei team plan to support this MZ52X series in Cube scenario?
Boreas
Reply Johnny_Depp Created Jun 22, 2019 06:23:34
(0)
(0)
Sorry, as i known, there was no exact date to support the MZ52. however, if you wanted to get a perfect experience from FusionCube product, you'd better to contact the Huawei local office. they will provide you a standard FusionCube scheme. |
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
