External IR on Camera

Hike · Created Sep 19, 2019 07:27:33

Posted by shelly0923 at 2019-09-19 07:00Dear Hike,Thank you for your reply, can it support external IR if we are to mount with the camera, o ...

Dear Shelly
What is your external device? Does the external device need to be controlled by the camera?

We do not adapt to external infrared illuminators. If you have requirements, you can submit the RM list.

Hike · Created Sep 19, 2019 06:53:20

Dear Shelly

The following is the product description of the three cameras.

Infrared Lamp Control

**Table 9** Infrared lamp control
Parameter	Description
Intelligent infrared	Indicates whether to enable the intelligent infrared lamp control. You are advised to enable this function when the infrared light is enabled. The check box is selected by default.
Intelligent infrared level	The default value is 50, when the screen from the leaves, wires and other strong reflective material rivalry, there may be exposed phenomenon, this value can be set smaller.
Infrared lamp control mode	Indicates the mode in which the infrared light is controlled. The options are as follows: Auto (default): Indicates that the IPC automatically enables or disables the infrared light and controls the infrared light brightness. Manual: Indicates that users manually enable or disable the infrared light and control the infrared light brightness. NOTE: You can configure the infrared light for an IPC, so the IPC can use it to increase the infrared illumination and enhance image quality in extremely low illumination conditions. The infrared light is automatically disabled in color mode. The infrared light includes three types, dipped light, second light and high light.Fixed focus and manual zoom infrared camera does not support IR group selection, such as IPC6224-IR, IPC6324-MIR, IPC6325-WD-VR.
Dipped light brightness	This parameter is available only when you set Infrared lamp control mode to Manual. To enable the dipped light, select the check box. You can set Dipped light brightness only when Dipped light is selected. A larger value indicates higher brightness.
Second light	This parameter is available only when you set Infrared lamp control mode to Manual. To enable the dipped light, select the check box. You can set Second light brightness only when Second light is selected. A larger value indicates higher brightness.
High light	This parameter is available only when you set Infrared lamp control mode to Manual. To enable the dipped light, select the check box. You can set High light brightness only when High light is selected. A larger value indicates higher brightness.
Status	Indicates whether the infrared light is on. The options are as follows: Enable: on Disable: off

This article contains more resources

You need to log in to download or view. No account? Register

x

shelly0923 · Created Sep 19, 2019 07:00:37

Dear Hike,

Thank you for your reply, can it support external IR if we are to mount with the camera, or beside the camera?

Thanks

Hike · Created Sep 19, 2019 07:27:33

Posted by shelly0923 at 2019-09-19 07:00Dear Hike,Thank you for your reply, can it support external IR if we are to mount with the camera, o ...

Dear Shelly
What is your external device? Does the external device need to be controlled by the camera?

We do not adapt to external infrared illuminators. If you have requirements, you can submit the RM list.

External IR on Camera

Recommended answer

Infrared Lamp Control

This article contains more resources

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

External IR on Camera

Recommended answer

Infrared Lamp Control

This article contains more resources

Third Party’s Trade Secret

My Followers