Hi, I have a problem with CFU function on U1960 SIP subscriber
CFU function on local subscriber (internal number 8010) to national mobile number was implemented
successfully from LMT or WEB management interfaces.
There are no call restriction limits on 8010 number and on national prefix 0*, because I can success called on my CFU mobile number from this 8010 number directly.
(subscriber type - Advanced, Outgoing call right - IntraOf&Local&Nat, 0 prefix 0-11 numbers long - national toll call type)
CFU function from local 8005 to 8010 -CFU- external mobile number worked OK.
CFU function from external XXXXXX to 8010 -CFU-external mobile number NOT worked with announcement 1) ¨CFU is proceeding¨ 2) ¨sorry, you are not allowed to make this call. Please contact your system administrator for assistance¨. Have I some subscriber config error ? This post was last edited by zaytdinovaee at 2018-05-10 08:31.
External CFU function not worked
Created: May 10, 2018 08:27:35Latest reply: Jul 26, 2018 13:23:11
2582
16
0
0
0
- x
- convention：
- Emotion(0)
|
1:- show softargu configinfor id 443 (the default value is 0) , try change to 1 using command onfig softargu type 443 value 1(if not working after change return back to default)
2:- make sure user you configure CFU the outgoing call rights is including Mobile rights. using command config modify subscriber dn 8010 (and scroll down till parameter outgoing call rights then add mobile rights as below  |
|
Posted by AalyY at 2018-05-10 18:54 1:- show softargu configinfor id 443 (the default value is 0) , try change to 1 using command onfig ... [%eSpace U1960(config)]#Show subscriber dn 8010 Subscriber ------ ---------- -------------- ------------ ------------ ------------------ --------- -------------- ------------- ------------ ----------- -------------- --------------- -------------- ----------------- ----------------- ---------------- --------------- ------------ ------------------- ------------------- --------------- -------------------- -------------- ------------------- ------------------ -------------- ----------------- ------------ ---------------- ------------- ------------- -------- Dn LongDn DomainName TermName UserType UserPriorLevel State CallSource UserState SubPBXNo FaxMode RegGroupId BindUserNum RemarkInfo DirectDialTKC RingTypeIndex CentrexGroup PickupGroup PbxGroup OutgoingRight IncomingRight Telephonist BLFCallerDisplay AreaNumber OuterCRBTSwitch UmsLonDnSwitch ProxyRegId ProxyRegState VMSLevel WmiSubscribe SubsState CACPrefix SRTP ------ ---------- -------------- ------------ ------------ ------------------ --------- -------------- ------------- ------------ ----------- -------------- --------------- -------------- ----------------- ----------------- ---------------- --------------- ------------ ------------------- ------------------- --------------- -------------------- -------------- ------------------- ------------------ -------------- ----------------- ------------ ---------------- ------------- ------------- -------- 8010 8010 8010 8010 NORMAL Advanced IDLE 0 NORMAL 0 BYPASS 0 NA - - - - - INTER/LOCAL/DDD/IDD INTER/LOCAL/DDD/IDD No No OFF No ---/---/--- Normal NO --- Disable ------------ ----------------- ------------------- ----------- -------------- --------------- ----------------- --------------- UserName faxmailnumber SipTermSubState NewMsgs voipdomain BillingType SuspendedFlag PotswmiType ------------ ----------------- ------------------- ----------- -------------- --------------- ----------------- --------------- - Invalid 0 DefaultDomain Periodic No -- CallLimit ---------------- ------------------- ------------------- ---------------- ---------------- ----------------- ----------------- PwdCallLimit CallerTimeLimit CalledTimeLimit DDDTimeLimit IDDTimeLimit DDDLimitState IDDLimitState ---------------- ------------------- ------------------- ---------------- ---------------- ----------------- ----------------- NO --- --- 0(min) 0(min) UNLOCK UNLOCK Append Subscriber Information ----------------------- --------------- ---------------- ------------------- OutgoingCustomRight ConfFactory DistinctRing AutoAnswerDelay ----------------------- --------------- ---------------- ------------------- - - Off 0(sec)   |
|
CFU parameters:
 There is no ForwardOutgoingRights parameter in my U1960 configmodify subscriber command. My ver:Board type: |
|
Posted by zaytdinovaee at 2018-05-11 02:15 There is no ForwardOutgoingRights parameter in my U1960 configmodify subscriber command. My ver:Boar ...  in your case you can do it using below, first login webpage Choose user , service configuration, Call forward uncoditional, then edit and choose incomming call as Externaal, you will edit time and also incase you need Edit status of Forward(CFU is equal to call forward Status Any time start 00,00,00 end 23,59,59) as below  |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
