Export all ONTs from NCE to a file

Hi, friend.

Confirmed that this command can be used to query the configuration information of a GPON ONU.

Direction For Use 

The TL1_ONT_SN_LENGTH or TL1_SN_LEN_SPECIAL_ONUTYPE configuration item has been set to control the number of bits of the GPON ONU serial number in the response.

Command Format

LST-ONT::[NAME=onu-name|ONTSN=ont-serianu|PWD=ont-password][[,]((DID=Device-id|DEV=Device-name)[,FN=Frame-id[,SN=Slot-id[,PN=Port-id[,ONTID=ont-id]]]][,(ONTSN=ont-serianum)|(RUNSTAT=run stat)])|(ONUDID=Mdu-Device-id|ONUDEV=Mdu-Device-name)]:CTAG::[SHOWOPTION=option of result’s attribut

Usage Examples

For example, to query the ONT list whose device name is 10.78.217.111,

• issue commands 

  LST-ONT::DEV=10.78.217.111:6::;

• Response message

  7340034 2010-11-20 05:55

  M 6 COMPLD

  EN=0 ENDESC= success.

  blktag=1

  blkcount=2

  blktotal=100

  Ont information of the device 10.78.217.111

  ---------------------------------------------------------------------------------------------------------------------------------------------

  DID FN SN PN ONTID NAME ALIAS CAPABPROF VENDORID

  EQUIPMENTID MAINSOFTVERSION AUTH AUTHTIMEOUT LINEPROF SRVPROF

  7340034 0 16 1 113 10.78.217.111/ subrack 0/slot 16/port 1/OnuID113 -- -- -- -- --

  SN Disable HG863_Line_Profile_1 HG850a_srv

  7340034 0 16 1 114 10.78.217.111/ subrack 0/slot 16/port 1/OnuID114 -- -- -- -- --

  SN Disable HG863_Line_Profile_1 HG850a_srv----------------------------------------------------------------------------------------------------------------------------------------

Thanks.