Got it

ETH_LOS ALARM

Created: Feb 10, 2022 11:37:47Latest reply: Feb 10, 2022 18:49:48 141 3 0 0 0
  Rewarded HiCoins: 0 (problem resolved)
8800 SDH board reporting Eth_Los alarm.
Have change the patch cord and the attenuator
Rx power now -7.4
Reference power -6.5

But the alarm didn't clear on NMS...
How to clear it? Urgent
Regards
Chris

Featured Answers

Best answer

Recommended answer

liqiang185
Admin Created Feb 10, 2022 11:43:40

Dear friend!
You can synchronize alarms.

1. Open the Alarm Monitor app and choose Alarm Settings from the main menu. Alternatively, open the Network Management app and choose Monitor > Alarm > Alarm Settings from the main menu.

2. In the navigation pane, choose Alarm Synchronization.

3. On the Alarm Synchronization page, click Custom Alarm Sources. In the dialog box that is displayed, select alarm sources to be synchronized and click OK.

4. Click Synchronize.

If the alarm persists, perform a warm reset on the SCC board.

Thank you!



View more
  • x
  • convention:

All Answers

Dear friend!
You can synchronize alarms.

1. Open the Alarm Monitor app and choose Alarm Settings from the main menu. Alternatively, open the Network Management app and choose Monitor > Alarm > Alarm Settings from the main menu.

2. In the navigation pane, choose Alarm Synchronization.

3. On the Alarm Synchronization page, click Custom Alarm Sources. In the dialog box that is displayed, select alarm sources to be synchronized and click OK.

4. Click Synchronize.

If the alarm persists, perform a warm reset on the SCC board.

Thank you!



View more
  • x
  • convention:

Dear friend!
You can synchronize alarms.

1. Open the Alarm Monitor app and choose Alarm Settings from the main menu. Alternatively, open the Network Management app and choose Monitor > Alarm > Alarm Settings from the main menu.

2. In the navigation pane, choose Alarm Synchronization.

3. On the Alarm Synchronization page, click Custom Alarm Sources. In the dialog box that is displayed, select alarm sources to be synchronized and click OK.

4. Click Synchronize.

If the alarm persists, perform a warm reset on the SCC board.

Thank you!

View more
  • x
  • convention:

Thank you
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.