eSight Two network configuration Highlighted

Hi everybody！

I would like to share with you important knowledge points.

Problem Description:

I have CE6881 and eSight

CE6881 - Vlan 1 and VLAN 100 

with separate cables and ports

Example 

10ge1/0/1

description R&D Dept A

port link-type access 

Port default vlan 1 

10ge1/0/2

description R&D Dept B

port link-type access 

Port default vlan 100

eSight on SUSE two Network Card Connected -- ping is ok! (VLan 1 and Vlan100)

CE6881 Software Version V200R019C10SPC800 and patch V200R019SPH006

eSight V300R010C00SPC635

eSight on SUSE and Two Network Card (R&D Dept A and R&D Dept B) -- Ping is Ok

This My Topology and My Configuration

https://support.huawei.com/enterprise/en/doc/EDOC1100107084/17f7964a/example-for-configuring-automatic-device-discovery-using-snmpv2c

R&D Dept A Connect SNMP and Ping - No Problem

but

R&D Dept B ping is ok ------->>> SNMP no Connect

Solution

 Change esight ip address
Operation Procedure:

1- Open Suse Terminal
2- ossuser@eSight-SUSE:/opt/eSight/mttools/tools> ./ipchange.sh --->>Run eSight IP Address Tool
3- Change other network card address

That's all.

I hope you like it. I welcome everyone to leave a message and exchange in the comment area!

Thank you！