eSCN230-How to configure to make the two Laptops connected to two CPE can Ping each other

eSCN230---How to configure to make the two Laptops connected to two CPE can Ping each other

Created: Jan 19, 2020 02:12:56Latest reply: Dec 19, 2021 14:33:14 337 2 2 0 0

【ProblemDescription】

1.Customers need to know how to implement PC interworking between different subnets.
2.How to configure to make the two Laptops connected to two CPE can Ping each other

【Problem Analysis】:

1. eapp and escn230 is eLTE 3.4 SPC625 version
2. Enable the msbehind route function.
3. Switches can be connected to PCs on different subnets.ping test is normal

【Root Cause】:

Customer consultation issues,customer does not know how to configure the interworking between CPE wan and lan port in different subnets.
【Solution Description】:

1. The PC connected to the CPE in the same subnet can communicate with each other. You only need to enable the local direct mode feature of the core network. For details, see the product documentation.link:http://support.huawei.com/enterprise/portal/eLTE_Information_Service_Portal.html
2. In different subnets, PC connected to CEPS can communicate with each other. Therefore, you need to configure the transmission IP layer between different subnets. The transmission IP layer needs to be configured on the transmission side.