Got it

Error when I ping domain name

Created: Feb 2, 2020 20:40:57Latest reply: Feb 5, 2020 12:24:19 617 6 0 0 0
  Rewarded HiCoins: 1 (problem resolved)

I have the following network (attached). I can successfuly ping the servers' IP, but when I try to ping the domain names, I get the error:

Error: Unknown host www.domainname.com (same with ftp).

Is there another way to configure the servers, other than the one attached?

Thanks.

Attachment: You need to log in to download or view. No account? Register

Featured Answers

Best answer

Recommended answer

chenhui
Admin Created Feb 3, 2020 02:10:02

Hi @Aegwynn
please check the R2 configuration, if the DNS proxy feature and DNS server IP have been enabled.
please refer the configuration below
#
dns resolve
dns server 10.1.1.3
dns proxy enable
#
View more
  • x
  • convention:

Aegwynn
Aegwynn Created Feb 4, 2020 21:55:53 (0) (0)
Hello @chenhui
I did as you said, but I still get the same error. The only difference is that now it takes like 10 seconds to display it (before I would get it instantly).  
All Answers
Hi @Aegwynn
please check the R2 configuration, if the DNS proxy feature and DNS server IP have been enabled.
please refer the configuration below
#
dns resolve
dns server 10.1.1.3
dns proxy enable
#
View more
  • x
  • convention:

Aegwynn
Aegwynn Created Feb 4, 2020 21:55:53 (0) (0)
Hello @chenhui
I did as you said, but I still get the same error. The only difference is that now it takes like 10 seconds to display it (before I would get it instantly).  
You can
View more
  • x
  • convention:

@Adgwynn hi,
OK then, you might need to check the server configuration, did it configure the gateway?
Or you can upload the project, so we can help to locate the problem.
View more
  • x
  • convention:

Aegwynn
Aegwynn Created Feb 8, 2020 12:23:34 (0) (0)
@chenhui when I double click the servers, the window that shows up is the one seen in images 1 and 2.png (attached), there's no CLI like when you double click a router or a switch, so that's how I configured the servers. Is there another way to do it?  
Aegwynn
Aegwynn Reply Aegwynn  Created Feb 8, 2020 13:29:19 (0) (0)
Nvm, I needed to press start in every server, only did it with the DNS. Derp. Thank you @chenhui for the help.  

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.