ERPS issue
Created: Dec 19, 2018 01:01:47Latest reply: Dec 20, 2018 09:01:41
566
15
0
0
Rewarded Hi-coins：
0
(problem resolved)
This post was last edited by user_3239949 at 2018-12-21 09:27.
hi, guys, I have one issue about the ERPS.
The topology is as below:
The Core switch is the S12704, AGG switch is the S7706.
I have configured two rings, the ring 1 is the main ring, and the ring 2 is the sub-ring.
On the Core 1 and Core 2 it have configured two ERPS ring.
When I shutdown the link between the Core 1 and Core 2, then shutdown the any one link on the Ring 1. It mean shutdown two Link on Ring 1.
After that operation, the service on the Ring 1 is down.
Why the service will not go to the Ring 2 ? How to solve it? Please give me suggestion, thank you very much!I have check the configuration which you answer, but it not solve the issue?
The topology is as below:
The Core switch is the S12704, AGG switch is the S7706.
I have configured two rings, the ring 1 is the main ring, and the ring 2 is the sub-ring.
On the Core 1 and Core 2 it have configured two ERPS ring.
When I shutdown the link between the Core 1 and Core 2, then shutdown the any one link on the Ring 1. It mean shutdown two Link on Ring 1.
After that operation, the service on the Ring 1 is down.
Why the service will not go to the Ring 2 ? How to solve it? Please give me suggestion, thank you very much!I have check the configuration which you answer, but it not solve the issue?
- x
- convention：
All Answers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reply
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
