Hello Huawei Support Team,
When I try to do NAT Server with port translation I get three problem when I do "display nat session all" on AR routers
1) The output is really slow to appear
2) Initial Destination port is wrong. Should be "1234"
3) Destination port translation is not working.
See details below
interface GigabitEthernet0/0/1
I check many times the conf and I'm sure that the scenario in the attachment should work.
Can you tell me if this is a bug.
Regards
Mirko Gilioli
Huawei Certified Systems Instructor
ip address 1.0.0.14 255.255.255.240
nat server protocol tcp global 1.0.0.5 1234 inside 192.168.0.100 ftp
#
return
[R1]disp nat session all
NAT Session Table Information:
Protocol : TCP(6)
SrcAddr Port Vpn : 1.0.0.1 22726
DestAddr Port Vpn : 1.0.0.5 53764
NAT-Info
New SrcAddr : ----
New SrcPort : ----
New DestAddr : 192.168.0.100
New DestPort : ----