Got it

eNSP my first impression

Latest reply: Jun 18, 2016 10:06:07 5565 2 0 0 0

Hello All,

 

I must say that i'm very pleased with this new tool, even in its beta form. I find it very usefull.

So, here are my findings after playing a while with eNSP.

Multi Command Line Interface, very handy. Suggestions,

  • Make it the default
  • Add option to remove a tab
  • Add option to rearrange the tabs
  • Add option to refresh the tabs, so that changed devices names will reflect the name on the tab again, or change it dynamically

Ports on the routers have to be set open with "undo shut", which is normally not necessary

Router or Switch information on the left site, i would suggest a more short bullit layout, 22 instead of twenty-two etc, which is more readable.

 

Missing GigabitEtheret 0/0/0 and 0/0/1 in the interface list on the router.

 

Ctrl+A in the command line Interface selects all the text, instead of placing the cursor at the beginning of the line.

 

When creating a loop on a switch, no broadcast storm seems to be emulated.

 

Display ospf error seems not to be working

 

When setting Debugging for OSPF and then going to the system-view for a while and then go back to user-view, no information is shown about the debug settings, but the debug settings are still there.

 

I understand from previous post in this forum that other devices will be add in the future. It would be nice if a Eudemon device is among them.

 

I think that eNSP can easily compete with GNS3 and Packet Tracer, but eNSP is hardly to find on the Huawei website, even so is this forum.

So, to make eNSP a success, it must me easier to find.

 

Thanks for this great product and keep up the good work!

 

Kindly regards,

 

Hugo Klein Nagelvoort

HCDP

 

 

 

 

 

  • x
  • convention:

ensp_commiter
Created Sep 10, 2012 05:57:08

hi, HugoKln

thank you for your suggestions.


We have verified the problem you provide,I hope the following answer will satisfy with you.

1、we want to simulate the real router, so reserve the "undo shutdown",then some beginners will not misunderstand.

2、we have written down this suggestion,and we will ask for others' suggestions.

3、this problem have been fixed in the spc100 version.

4、ok, we will ask for others' suggestions and then discuss the Ctrl+A

5、maybe it is due to the STP function is enabled in default,you can try to type the " stp disable".

6、we have not understood your real meaning.we test the  command "display ospf error" ,and it worked normally.please tell us the details.

7、maybe you should type the "t d" in the user-view to open the terminal debugging.


 

View more
  • x
  • convention:

user_2296671
Created Jun 18, 2016 10:06:07

希望可以帮助我
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.