Got it

eNSP error 'QinQ interface does not support interworking'

Latest reply: Jan 27, 2018 12:41:35 2799 7 0 0 0

Hello!

This post is about the eNSP error 'QinQ interface does not support interworking'.


I'm trying to configure an admin pwe3 as per below, but I am getting this error:

[M2F_2-LoopBack1]mpls l2vc 11.11.11.11 1001 tunnel-policy FW control-word admin

Error: QinQ interface does not support interworking.
[M2F_2-LoopBack1]


Could anyone help me? Is this a sw bug?

Thanks!

@馥紫 please help!
View more
  • x
  • convention:

Command format:
Mpls l2vc {ip-address | pw-template pw-template-name} * vc-id [[control-word | no-control-word] | [raw | tagged] | mtu mtu-value |

Undo mpls l2vc [secondary]

S5700 and S3700 do not support mpls l2vc.
View more
  • x
  • convention:

Hello,

thanks for your feedback.
Actually i'm simulating a scenario with eNSP 1.200.00.500.
Devices used are "generic" Routers. All mpls l2vc configured are working fine but I cannot create l2vc under loopbak interface due to that error. I'm not using swithces.

Thanks
View more
  • x
  • convention:

This error is the command must be configured to qinq interface, can not be configured in the loopback mouth.
This command is VLL configuration, router does not support this feature.
View more
  • x
  • convention:

same error

[M2F_2-LoopBack1]mpls l2vc 11.11.11.11 1001 tunnel-policy FW control-word admin

Error: QinQ interface does not support interworking.
[M2F_2-LoopBack1]

help me

as soon as possible
View more
  • x
  • convention:

A complete solution of QinQ interface does not support interworking you like to posted here. The whole discussionis good especially for the networking field of work. Some very impressive effort done here and now i want australian assignment help because i could not solve some questions of my assignment.
View more
  • x
  • convention:

yangın söndürme tüpü nereden alacağınız nasıl bulacağınız için çok faydalı bir site ziyaret edin! http://www.yanginsondurmeistanbul.com This post was last edited by user_2999453 at 2018-01-27 12:43.
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.