eNSP CE12800 supports VXLAN or not?

Hello there!

This is an example of VXLAN that can be downloaded from an attachment view:

http://forum.huawei.com/enterprise/thread-401887.html.

Please use ensp500 to import the corresponding 500 version of the CE device package.

Thanks. This configuration works. But the configuration needs evpn and bgp configuration also which in document found from Internet, the VXLAN configuration is much more simple. If follow those document, although the tunnel and bridge domain are up, but no traffic can be passed, MAC address learning will not work...

e.g.

http://actfornet.com/HUAWEI_SUPPORT_DOCS/NE40E/Huawei%20NE%20V8R8C10%20Router%20Configuration%20Guide%20-%20VxLAN.pdf

Because the CE device occupies too much resources, the development team cut some of the features. I apologize for the inconvenience.

Got it and thanks a lot!

I've just set this up and works fine with EVPN and static tunnels. But as mentioned we can't test end to end connectivity. Will the full feature set for VXLAN be added anytime soon as well as stacking?

CE6800 supports vxlan on eNSP?