eNSP 1.2.300 Port Error

Huawei\eNSP\VBoxServer\config_vbox.ini

Please change the value of mgrStaPort、mgrApPort and dataUdpPort in this file and try again.

Sorry, problem remains.

I tried several port numbers.
No results.

Now I have this configuration, but it does not work.

[vbox_server]
    listenport=65510
    initlog=1
    mgrStaPort=40000
    mgrApPort=40100
    dataUdpPort=40200

Version 1.2.210 worked fine on my system (win7 64 bit).

Sorry, I think what you post has nothing to do with the problem.

When last version starts, there is a Port Initialization Problem as I mentioned before. Modifying ports at .ini file didn´t work.

eNSP main interface still appears, but if I start a router, I get a eNSP_VBoxServer crash. Then, eNSP does not respond and I have to shut it down with  Windows Task Manager.

Version 1.2.210 worked very fine.

I intalled last version of Virtual Box (4.3). The problem about Initializing Ports dissapeared. But now I get the message "Failed to initiate VirtuaBox". My eNSP es running under Administrator Priviledges and I have firewall disabled.

Any suggestion?

Thanks.

Solved.

You are right.

Last version of Virtual Box isn´t suppoted.

I had to install VirtualBox version  than comes within eSNP.

Thanks.

Hi,

I am receiving this Error. I install the V100R002C00B310.

As i start it, it is showing following errors. plz guide. thanks

Try to install the version of VirtualBox that comes with eNSP.

That way I solved port problems.

Cheers.