eNodeB firmware version switching

Hello, friend!

Today we bring you a case study on eNodeB firmware version switching. I hope it will be helpful to you.

Problem Description

Switch the eNodeB software version from the 3GPP version to Btunk Witten Verison.

Problem Analysis

3GPP R15SPC260 switch to Witten R004SPC200

To obtain the firmware version, please contact your local representative.

Solution

1.Backing Up Configuration Data (UPLOAD backup file to PC)(PC IP=X.X.X.X)

  BKP CFGFILE:ENCRYPTMODE=UNENCRYPTED, BL="LMT";

2. ULD CFGFILE: MODE=IPV4,IP="X.X.X.X", USR="admin", PWD="*****",DIR="D:\FTP\files";

3. Witten R004SPC200 File name: LMT.XML

Open MML software ：

       LST SOFTWARE

ACT CFGFILE(ACT CFGFILE: MOD=LEAST,EFT=AFTER_RESET;)

       ACT SOFTWARE (version requires decompression)

     SPL SOFTWARE

Thank you for viewing!