Enabling the roaming auto-connection on K5160 (E3372-153)

waiting the guy who can support for this issue:):)

https://consumer.huawei.com/en/mobile-broadband/e3372/specs/.

As it can be seen, it doesn't support the Linux system.

Yeah, I know :). But it wasn't difficult to make it work under Linux.

My question is about something different. Everything works fine when a local SIM is inserted (the modem is registered to network and automatically establish a connection). But when roam SIM is inserted, the registration is done successfully, but connection not (it waits for an acknowledge).

I know that this behavior is possible to change via WEB interface, but ... So my question is how to make this setting without WEB interface?

I'm looking for any way (via MBIM interface in WIndows, AT command, etc.) how to do this:
https://ibb.co/nzHs30

hi， due to this product is not enterprise device，please contact customer service for support，Thanks

https://consumer.huawei.com/en/support/hotline/

Hmm... I tried it, unfortunately the customer service guys didn't know anything about it :(. I would need some more technical assistance, datasheet, etc..

Hello

You can find more information about this product on the following link:
https://consumer.huawei.com/eg-en/support/mobile-broadband/e3372h-153/

Thanks, I've already had this information. I'm looking for "more deep" information like how to switch modes (HiLink/Modem), how to disable ZeroCD, etc. - just examples. So, maybe this place is not the right one for obtaining this kind of information.

Thanks for your time.

Hope to have some deep down information on it.

Your host OS is Embedded Linux which does not support configuration via MBIM,and k5160 doesn't support linux,I suggest you to change a modem that support linux.