Hello@ster
1、Run:
system-view
The system view is displayed.
2、Run:
interface interface-type interface-number
The interface view is displayed.
3、(Optional) On an Ethernet interface, run:
undo portswitch
The interface is switched to Layer 3 mode.
By default, an Ethernet interface works in Layer 2 mode.
4、Run:
ripng process-id enable
RIPng is enabled on the specified interface.
Only the S5720HI, S5720EI, S6720EI, and S6720S-EI support switching between Layer 2 and Layer 3 modes.