Dome camera connection with the rapid solution has been configured via EG860. Engineer should be able to handle the configuration of routing behind MS feature on rapid solution network. You can find configuration progress below.
· Configuration of EG860
· Configuration of dome camera
· eAPP configuration
· Routing behind MS feature activation on the core network
You can find rapid solution topology sample below, IP addresses can be changed according to the actual scenario.
Device Type | MSISDN | IMEI | IMSI | Web-based login information(for details, see EG860 User Guide.) | |
EG860 | 8605 | x | Virtual SIM card registration | IP address: https://192.168.1.1 User name: admin Password: 4GCPE@TD | |
Device Type | Device ID | User Name | User ID | User Password | Web-based login (For detailed information, see related product documents about Huawei cameras) |
Camera (Huawei) | 1 (unique) |
|
|
| IP address: 192.168.1.2 Gateway IP address: 192.168.1.1 (the IP address of the LAN port on the EG860) User name: admin Password: admin |
Step 1: Configuration of EG860
Engineer connects to EG860 and changes the configuration of device according to the actual plan. The default IP address of EG860 is 192.168.1.1, the username is admin and the password is 4GCPE@TD.
Disable the NAT function and enable Routing Behind MS function. Choose General Settings> Internet Settings ;
Check the IP configuration of the device in the internet settings tab. In our test scenario, local IP is 192.168.1.1 and WAN IP is 172.181.9.15 .
Steps 2: Configuration of Dome Camera
Log in to the dome camera with default IP whichis 192.168.0.120. In the actual scenario, it was 192.168.1.2 and no need to change it. Gateway IP address is the local address of EG860 which is “192.168.1.1”. The engineer can set the IP address according to the actual scenario.
Step 3 : eAPP Configuration
Firstly, need to configure EG860 on eUDC.Then the fixed user can be added to the system.
Add terminal with IMEI of EG860 in Terminal Management. It’s the same with UE installation on eUDC console. You can see the operation page below.
On virtual sim card generating tab, set to IMEI address to generate IMSI of EG860.
Set the UE PDN IP address as you planned before the operation, it’s WAN IP of EG860 which we planned before operation.
Note: Check EG860 connectivity with rapid solution, start ping test from eAPP IP to EG860 WAN IP.
EG860 and rapid solution connectivity is ready, then add the fixed camera on eUDC .
Vendor type is Huawei for dome camera configuration, and IP is 192.168.1.2 for our test. You can find sample configuration below.
Step 4: Routing Behind MS feature activation on core network
Connect to the core network using eOMC tool, then run ADD SUBNETBEHINDCPE command. Prepare IMSI and IP address of EG860. You can check the configuration output with LST SUBNETBEHINDCPE command.
Camera connection is ready for the rapid solution, then add camera to dispatch console and check feature's availability.
