Prerequisites

You have logged in to the eAPP Management System of the current server as the admin user. For details, see Logging In to the eAPP Management System.

Context

Device node configurations for the standard eAPP610 server are as follows:

• Add the core network as the ECN node. In the core network geographic redundancy scenario, an active ECN node and a standby ECN node must be configured. The IP addresses of the active and standby ECN nodes are respectively set to the Tx interface control-plane IP addresses of the active and standby eSCN230s/eCNS210s or those of the TSNs of the active and standby eCNS280s/eCNS290s. The active and standby ECN nodes must be configured with different SIP user numbers.

• Add the master eMRS620 as the MRS node. If there are multiple master eMRS620 servers, add all of them as the MRS nodes one by one.

Procedure

1. Select MDC Business on Home Page. The Configuration window is displayed.

2. Choose Dispatcher Configuration > Device Configuration > Device Node from the navigation menu. The Device Node window is displayed, as shown in Figure 1.

   
   

   Figure 1 Device Node window
   

   
   

3. Add corresponding device nodes.

   
   

   Option	Description
   Add the core network as the ECN node.	Go to Step 4.
   Add the master eMRS620 as the MRS node.	Go to Step 5.

   
   

4. Add the core network as the ECN node.

   
   

   
   

• eCNS210: "Configuring eCNS210 SIP Agent" in eCNS210 Product Documentation

• eSCN230: "Configuring eSCN230 SIP Agent" in eSCN230 Product Documentation

• eCNS280: "Configuring Interface Data" in eCNS280 Product Documentation

• eCNS290: "Configuring Interface Data" in eCNS290 Product Documentation

• eCNS210: "Configuring eCNS210 SIP Agent" in eCNS210 Product Documentation

• eSCN230: "Configuring eSCN230 SIP Agent" in eSCN230 Product Documentation

• eCNS280: "Configuring Interface Data" in eCNS280 Product Documentation

• eCNS290: "Configuring Interface Data" in eCNS290 Product Documentation

1. Click Add. The Add Device Node dialog box is displayed.

2. Set parameters according to the network plan data. Table 1 describes the parameters.

   Table 1 Parameters for adding the ECN node

   Parameter Name	Example Value	Parameter Description
   UBP Node ID	6	Specifies the node ID of the core network. The value is an integer ranging from 0 to 99999999. In a dispatching system, UBP Node ID must be unique for each NE.
   Node Name	ECN	Specifies the node name of the core network. The value is a string of 0 to 31 characters. This parameter is set as required and the value must be lucid.
   Node Type	ECN	Specifies the node type of the core network. Set the parameter to ECN. The value cannot be changed after being configured.
   Ipv4 Address	eSCN230/eCNS210: 192.168.16.5 eCNS280/eCNS290: 10.16.0.17	Tx interface control-plane IP address of the eSCN230/eCNS210 or Tx interface control-plane IP address of the TSN of the eCNS280 or eCNS290 (SIP link IP address). Set this parameter based on the network plan.
   Port	5060	Specifies the port ID for SIP registration of the core network with the eAPP610, which is an integer ranging from 1024 to 65535. The default value is 5060. The value of Port must be consistent with that on the core network side.
   User Number	99900010	Specifies the user number used by the core network when it registers with the eAPP610. NOTICE: User Number must be unique for each NE. The value of User Number must be consistent with that of SIPAGENTID on the core network side. For details, see the following: If User Number is locked, you can handle this situation by referring to Unlocking or wait until Unlock automatically duration expires.
   SIP Password	eLTE@com123	Specifies the SIP password used by the core network when it registers with the eAPP610. NOTICE: The value of SIP Password must be consistent with that of SIPAGENT PassWord on the core network side. For details, see the following: If the value of SIP Password is different from that of SIPAGENT PassWord on the core network, the user number is automatically locked after the maximum retry times is reached. The configurations of Password attempts times and Unlock automatically duration comply with related policies in OM Security Policy Management.

3. Click OK. The Operation Instruction dialog box is displayed, indicating that the operation is successful.

4. Click OK.

Add the MRS node based on network plan for the master eMRS620.

• Non-triple-plane isolation: 192.168.50.30

• Triple-plane isolation: 192.168.18.30

1. Click Add. The Add Device Node dialog box is displayed.

2. Set parameters according to the network plan data. Table 2 describes the parameters.

   Table 2 Parameters for adding a master eMRS

   Parameter Name	Example Value	Parameter Description
   UBP Node ID	7	Specifies the node ID of the master eMRS620. The value is an integer ranging from 0 to 99999999. In a dispatching system, UBP Node ID must be unique for each NE.
   Node Name	MRS	Specifies the node name of the master eMRS620 server. The value is a string of 0 to 31 characters. This parameter is set as required and the value must be lucid.
   Node Type	MRS	Specifies the node type of a master eMRS620 server. Select MRS. The value is unmodifiable once being set.
   Ipv4 Address		Specifies Control Plane IP of a master eMRS620 server. Set this parameter according to the network plan.
   Port	5062	Specifies the port ID for SIP registration of the master eMRS620 server with the eAPP610, which is an integer ranging from 1024 to 65535. The default value is 5062. NOTICE: The value of Port must be consistent with that of SIP Port Of Recording Server on the master eMRS620 server. For details, see "Configuring System Parameters" in eMRS620 User Guide.
   User Number	99900001	Specifies the user number used by the master eMRS620 server when it registers with the eAPP610. The value is an integer ranging from 99900001 to 99909999. NOTICE: User Number must be unique for each NE. The value of User Number must be consistent with that of SIP User Number on the master eMRS620 server. For details, see "Configuring System Parameters" in eMRS620 User Guide. The locking policy and unlock methods for User Number of the master eMRS620 are the same as those for User Number of the core network.
   SIP Password	eLTE@com123	Specifies the password of the master eMRS620 when it performs SIP registration with the eAPP610. The default value is eLTE@com123. The password policy complies with Password Rules and Minimum password length in OM Security Policy Management. The anti-cracking policy complies with that in Biz Security Policy Management. NOTICE: The value of SIP Password must be consistent with that of SIP User Password on the master eMRS620 server. For details, see "Configuring System Parameters" in eMRS620 User Guide.
   Outer Ipv4 Address	These parameters need to be configured only in external network access scenarios and the configurations must be consistent with those on the firewall.	Specifies the IP address of a master eMRS620 server on the external network. NOTICE: For the access of an eDC610, the value of this parameter cannot be the same as the IP address of the BCC on the external network. For the access of a public network terminal, the value of this parameter can be the same as the IP address of the BCC on the external network.
   Outer Port 1		Specifies the HTTPS port of the master eMRS620 server on the external network. The value is an integer ranging from 1024 to 65535. Outer port 1 is a dedicated port for video sending from public network UEs.
   Outer Port 2		Specifies the RTSP port of the master eMRS620 server on the external network. The value is an integer ranging from 1024 to 65535. Outer port 2 is the dedicated port for file playing of public network eDC610s.

3. Click OK. The Operation Instruction dialog box is displayed, indicating that the operation is successful.

4. Click OK.

5. (Optional) If there are multiple master eMRS620 servers, add other master eMRS620 servers as the MRS nodes one by one by referring to this procedure.