| Deployment Mode | Section |
| Wi-Fi+Web LMT deployment | For details, see 6.2 "Wi-Fi+Web LMT MML Deployment." |
| PnP deployment | For details, see 6.3 "PnP Deployment." |
Wi-Fi+Web LMT deployment
The eAN3820A supports the Wi-Fi function. Insert a Wi-Fi module to the USB port of the eAN3820A in initial state. The Wi-Fi hotspot is automatically enabled. Search a Wi-Fi hotspot on the portable laptop. A Wi-Fi hotspot HID_EsnNo is found. EsnNo indicates the last ten digits of the eAN3820A ESN.
note:the Wi-Fi hotspot is automatically disabled after parameters are configured during AirNode deployment.
1.Connect to Wi-Fi.
On the laptop, search for the Wi-Fi hotspot of HID_EsnNo, click to connect the Wi-Fi, and enter the password hwbs@com. The connection is successful.
2.Configure IP addresses to the same network segment.
The default IP address of the base station Wi-Fi is 192.168.0.100. Set the IP address of the portable laptop to reside in the same network segment as 192.168.0.100. In this way, the default IP address of the base station Wi-Fi can be pinged through on the portable laptop.
3.Log in to the Web LMT.
Open Internet Explorer, enter htpps://192.168.0.100 in the address box, and press Enter. Then run MML commands to deploy sites.
The Web LMT supports the Wi-Fi module.
PnP Deployment
6.3.1 Preparing the CME Configuration Environment
Prepare the installation operation guide for the standalone CME.
Download the guide at http://support.huawei.com/enterprise.
Specifically, choose Support > eLTE Integrated Access > Operations Support System > CME Standalone Tool to download the guide for CME V300R019C10SPC230.
Download and decompress the CME V300R019C10SPC230 Release Documents_ENG file. In the Standalone CME(for internal use) folder, open the iManager U2000-CME V300R019C10SPC230 Installation Guide (For Windows) file and then prepare CME configuration environment based on instructions described in this document.
