Document Name | Main Content | Support-E Link | Component |
MZ220 NIC User Guide | These documents describe the appearance, functions, and configuration methods of the network interface cards (NICs). | 请点击 | MZ220 |
MZ310 NIC User Guide | 请点击 | MZ310 | |
MZ312 NIC User Guide | 请点击 | MZ312 | |
MZ316 NIC User Guide | 请点击 | MZ316 | |
MZ510 NIC User Guide | 请点击 | MZ510 | |
MZ512 NIC User Guide | 请点击 | MZ512 | |
MZ611 NIC User Guide | 请点击 | MZ611 | |
MZ710 NIC User Guide | 请点击 | MZ710 | |
MZ910 NIC User Guide | 请点击 | MZ910 | |
MZ912 NIC User Guide | 请点击 | MZ912 |
MZ220
简介:
The MZ220 is a Fibre Channel (FC) host bus adapter (HBA). It is used for E9000 compute nodes and provides two 16G FC ports for compute nodes to connect to switch modules in the chassis.
The MZ220 uses the Emulex XE201 chip, and its two 16G FC ports support 16G/8G auto-negotiation. The MZ220 supports FC network applications and provides high-bandwidth, high-performance storage network solutions.
功能:
1.NPIV(N_Port_ID Virtualization)
2.SAN Boot
MZ310
简介:
The MZ310 is an Ethernet network interface card (NIC). It is used for E9000 compute nodes and provides two 10GE ports for compute nodes to connect to switch modules in the chassis.
The MZ310 uses the Intel 82599 chip and supports NIC applications.
功能:
1.PFC(Priority Flow Control)
2.ETS(Enhanced Transmission Selection)
3.802.1Q VLAN
4.SR-IOV(Single Root I/O Virtualization)
5.PXE和iSCSI Boot
MZ312
简介:
The MZ312 is a dual-chip Ethernet NIC. It is used for E9000 compute nodes and provides four 10GE ports for compute nodes to connect to switch modules in the chassis.
The MZ312 uses two Intel 82599 chips and supports NIC applications.
功能:
1.PFC(Priority Flow Control)
2.ETS(Enhanced Transmission Selection)
3.802.1Q VLAN
4.SR-IOV(Single Root I/O Virtualization)
5.PXE和iSCSI Boot
MZ316
简介:
The MZ316 iNIC (MZ316 for short) is a network interface card with excellent performance. The MZ316 adopts the multi-core and multi-threaded network processor (NP) architecture and is used for virtual switching, security isolation, and quality of service (QoS) in cloud computing and virtualization solutions.
功能:
The MZ316 provides the following functions and features:
Adopts the multi-core and multi-threaded network processor (NP) architecture to process packets efficiently.
Complies with Peripheral Component Interconnect Express (PCIe) 2.0 specifications to provides a PCIe x8 bus interface.
Supports multiple queues and virtual network interface cards (NICs), providing 256 queues or virtual interfaces.
Supports load balancing on active and standby ports.
Sends packets directly through virtual machine device queue (VMDQ) and forwards packets through Domain0.
Supports virtual switching functions, including layer 2 switching, broadcast packet suppressing, and virtual local area network (VLAN).
Supports security functions, including packet filtering based on the access control list (ACL), stateful packet inspection (SPI), and mapping checking for IP addresses and media access control (MAC) addresses.
Supports quality of service (QoS) and traffic statistics.
Supports the Smart Unified Virtualization Platform (Smart UVP for short).
Supports live migration.
Supports the NIC firmware upgrade through a PCIe port.
Supports application specific packet filter (ASPF) over FTP.
Provides two 10GE ports, supporting a maximum transmission rate of 8 Gbit/s and the (Preboot Execution Environment) PXE function, and applies to the CH121 and CH240 compute nodes of the E9000 Platform.
MZ510
简介:
The MZ510 is a 10GE converged network adapter (CNA). It is used for E9000 compute nodes and provides two 10GE ports for compute nodes to connect to switch modules in the chassis.
The MZ510 uses the Emulex BladeEngine3 (BE3) chip, and supports NIC, Fibre Channel over Ethernet (FCoE), and Internet Small Computer System Interface (iSCSI) applications to achieve converged network solutions.
功能:
1.UMC(Universal Multi Channel)
2.PFC(Priority Flow Control)
3.ETS(Enhanced Transmission Selection)
4.802.1Q VLAN
5.SR-IOV(Single Root I/O Virtualization)
6.NPIV(N_Port_ID Virtualization)
7.PXE,SAN Boot,iSCSI Boot
MZ512
简介:
The MZ512 is a 10GE converged network adapter (CNA). It is used for E9000 compute nodes and provide four ports for compute nodes to connect to switch module slots in the chassis.
The MZ512 uses the BladeEngine3 (BE3) chip, and supports NIC, Fibre Channel over Ethernet (FCoE), and Internet Small Computer System Interface (iSCSI) applications to achieve converged network solutions.
功能:
1.UMC(Universal Multi Channel)
2.PFC(Priority Flow Control)
3.ETS(Enhanced Transmission Selection)
4.802.1Q VLAN
5.SR-IOV(Single Root I/O Virtualization)
6.NPIV(N_Port_ID Virtualization)
7.PXE,SAN Boot,iSCSI Boot
MZ611
简介:
The MZ611 is an InfiniBand (IB) HCA. It is used for E9000 compute nodes and provides two 56G IB fourteen data rate (FDR) ports for compute nodes to connect to switch modules in the chassis.
The MZ611 uses the Mellanox ConnectX-3 (CX3) chip and supports HCA applications. The 56G ports on the MZ611 support 56G/40G auto-negotiation and support 56G (FDR) and 40G (QDR) port applications (QDR stands for quad data rate). The MZ611 also supports the Remote Direct Memory Access (RDMA) feature to address low-latency network applications.
功能:
1.RDMA(Remote Direct Memory Access)
2.QoS
MZ710
简介:
The MZ710 is an Ethernet network interface card (NIC). It is used for E9000 compute nodes and provides 40GE ports for compute nodes to connect to switch modules in the chassis.
The MZ710 uses the Mellanox ConnectX-3 Pro (CX3 Pro) chip and supports NIC applications. The 40GE ports on the MZ710 support 40G/10G auto-negotiation, and 40GE and 10GE port applications. The MZ710 supports the Remote Direct Memory Access over Converged Ethernet (RoCE) feature to address low-latency network applications.
功能:
1.802.1Q VLAN
2.SR-IOV(Single Root I/O Virtualization)
3.PXE
4.RoCE(RDMA over Converged Ethernet)
5.VxLAN and NVGRE
MZ910
简介:
The MZ910 is a multi-purpose NIC. It is used for E9000 compute nodes, and provides two 10GE ports and two 8G Fibre Channel (FC) or 10G Fibre Channel over Ethernet (FCoE) ports for compute nodes to connect to switch modules in the chassis.
The MZ910 uses the Emulex XE201 chip. It provides two 10GE ports to support NIC applications, and provides two 8G FC or 10G FCoE ports (the port mode is configurable) to support FC and FCoE network applications. Software can automatically set the port mode (FC or FCoE)depending on the type of the connected switch modules.
The MZ910 provides independent physical ports to connect the service network and storage network respectively, which implements physical isolation between the two networks.
功能:
1.PFC(Priority Flow Control)
2.ETS(Enhanced Transmission Selection)
3.802.1Q VLAN
4.SR-IOV(Single Root I/O Virtualization)
5.NPIV(N_Port_ID Virtualization)
6.PXE, SAN Boot和iBFT
MZ912
简介:
The MZ912 is a multi-purpose NIC. It is used for E9000 compute nodes, and provides two 10GE ports and two 16G Fibre Channel (FC) or 10G Fibre Channel over Ethernet (FCoE) ports for compute nodes to connect to switch modules in the chassis.
The MZ912 uses the Intel 82599 chip and Emulex XE201 chip. The Intel 82599 chip provides two physical 10GE ports, and supports NIC applications. The XE201 chip provides two 16G FC or 10G FCoE ports (the port mode is configurable), and supports FC and FCoE network applications. Software can automatically set the port mode (FC or FCoE)depending on the type of the connected switch modules. If the port mode is FC, 16 Gbit/s or 8 Gbit/s auto-negotiation is supported.
The MZ912 provides independent physical ports to connect the service network and storage network respectively, which implements physical isolation between the two networks.
功能:
1.PFC(Priority Flow Control)
2.ETS(Enhanced Transmission Selection)
3.802.1Q VLAN
4.NPIV(N_Port_ID Virtualization)
5.SR-IOV(Single Root I/O Virtualization)
6.PXE,SAN Boot和iSCSI Boot