E9000 easylink configuration for CX916 and blades equipped with MZ220

Created: Dec 11, 2019 07:05:01Latest reply: Dec 11, 2019 09:45:10 133 5 0 0
  Rewarded Hi-coins: 0 (problem resolved)

I have E9000 chassis configured with CX916 in 2x and 3x and 13 blades  ch121 v5 configured with MZ220 need to configure it with easylink to communicate with the 2 SNS switches for storage access and service core switches for accessing desktop VMs

E9000


  • x
  • convention:

Featured Answers
stephen.xu
Admin Created Dec 11, 2019 09:45:10 Helpful(0) Helpful(0)

Posted by M.Ghaly at 2019-12-11 08:40 I already have this guide ...but i need the steps for CX916 and mz220

Hi, 


Please do as the following steps to configure the easylink:


  1. Click Stateless Computing > easylink Configuration > Configuration Wizard

  2. Choose the Switch model as CX916.

  3. Set required other parameters based on the wizard.


CX916


  • x
  • convention:

All Answers
stephen.xu
stephen.xu Admin Created Dec 11, 2019 07:08:46 Helpful(0) Helpful(0)

Can you describe your problem brief?

or you just sharing us?
  • x
  • convention:

M.Ghaly
M.Ghaly Created Dec 11, 2019 07:15:28 Helpful(0) Helpful(0)

I need to know the easylink configuration step by step to make all blades discovered from access network and connected to storage array
  • x
  • convention:

Mohamed Ghaly
stephen.xu
stephen.xu Admin Created Dec 11, 2019 07:38:38 Helpful(0) Helpful(0)

Posted by M.Ghaly at 2019-12-11 07:15 I need to know the easylink configuration step by step to make all blades discovered from access net ...
I found the configuration guide for easylink, which should be helpful to you.

https://support.huawei.com/hedex/hdx.do?docid=EDOC1000053358&id=EN-US_TOPIC_0132163190&lang=en
  • x
  • convention:

M.Ghaly
M.Ghaly Created Dec 11, 2019 08:40:33 Helpful(0) Helpful(0)

I already have this guide ...but i need the steps for CX916 and mz220
  • x
  • convention:

Mohamed Ghaly
stephen.xu
stephen.xu Admin Created Dec 11, 2019 09:45:10 Helpful(0) Helpful(0)

Posted by M.Ghaly at 2019-12-11 08:40 I already have this guide ...but i need the steps for CX916 and mz220

Hi, 


Please do as the following steps to configure the easylink:


  1. Click Stateless Computing > easylink Configuration > Configuration Wizard

  2. Choose the Switch model as CX916.

  3. Set required other parameters based on the wizard.


CX916


  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login