E Line services configuration step's in OSN3500 using IMaster NCE
Created: Feb 18, 2022 12:20:39Latest reply: Feb 25, 2022 16:10:41
175
4
0
0
0
HiCoins as reward：
0
(problem unresolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Dear friend! Please perform the following operations: 1. Access the menu and set the service type to ETH.
2. Select the port on the packet interface board at the source and sink sites.
3. Create a static tunnel.
4. In the Create PWE3 Service dialog box, click OK. 5. On the Tunnel Management page, set the peak bandwidth of the service.
Thank you! |
|
All Answers
|
Dear friend! Please perform the following operations: 1. Access the menu and set the service type to ETH.
2. Select the port on the packet interface board at the source and sink sites.
3. Create a static tunnel.
4. In the Create PWE3 Service dialog box, click OK. 5. On the Tunnel Management page, set the peak bandwidth of the service.
Thank you! |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
