During the process of importing VM into the FusionCompute,"prompt the host cannot connect to the shared directory."

During the process of importing VM into the FusionCompute, "prompt the host cannot connect to the shared directory."

Created: Sep 13, 2018 06:36:52 555 0 0 0 0

During the process of importing a VM into FusionCompute, the system prompts that the host cannot connect to the shared directory. The local PC firewall and services are closed. The shared path link can be used to access the shared directory. However, the process of importing the virtual machine is always as shown in the figure. Error: (Confirm all information is entered correctly)

f the local PC where the template is located runs the Windows 7 operating system (OS), an error message "The CNA failed to connect to the shared directory" may be displayed due to the OS settings. To address this problem, perform the following operations:

On the local PC, click Start, enter regedit in the search box, and press Enter.
Choose HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > Session Manager > Memory Management, and change the value of LargeSystemCache to 1.
Choose HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > LanmanServer > Parameters, and change the value of Size to 3.
Restart the local PC, and import the VM using the VM template again.

During the process of importing VM into the FusionCompute, "prompt the host cannot connect to the shared directory."

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

During the process of importing VM into the FusionCompute, "prompt the host cannot connect to the shared directory."

Third Party’s Trade Secret

My Followers