Hello, everyone!
Today I want to share with you information about the B593S-22 device and how to upgrade the firmware.
Please collect it in time!
This post provides firmware version Huawei B593s-22 V200R001B270D25SP00C00 and can be downloaded from the end of this article. Incorrect firmware/software changes to a Huawei modem/router may permanently damage your device. When running a Huawei firmware update, it prompts for the firmware/flash code as the password. If you change your modem/router/MiFi firmware without your knowledge, we are not responsible and recommend you seek a detailed solution from your local ISP for the upgrade.
First, let's briefly introduce the B593.
What Is B593
Huawei B593 is a stylish 4G router. As the first-generation 4G LTE wireless router, Huawei B593 has evolved several variants to support a wide range of LTE bands deployed around the world. Huawei B593s-22 is an upgraded model of the B593 LTE CPE.
Currently, many users seeking high-speed access from home are using the Huawei B593s-22. It's an excellent modem for high-speed Internet access and stable connectivity, especially for working from home.
B593s-22 specifications
Height: 190 mm; width: 176 mm; thickness: 35 mm; weight: 500 gr
2G/3G/4G up to 150 Mbit/s transmissions up to 50 Mbit/s, LTE FDD 800/1800/2600 MHz, HSPA+ 900/2100 MHz, GSM/GPRS/EDGE 850/900/1800/1900 MHz
Connectors: 1 USB port, 1 Reset button, 1 SIM card slot (common), 2 RJ11 phone ports, 1 power button, 4 LAN ports, 1 USB port, 1 WPS button
WiFi supports up to 32 wireless devices
Web interface for configuration
How to configure Huawei B593s-22 router
The B593s-22 router configuration is simple. Insert the SIM card, connect the router, and power on the device.
If the PIN of the SIM card is not 0000, you need to set the PIN on the WebUI. To do this, connect the RJ45 cable to the router and connect it to your PC. Using an Internet browser, go to the address 192.168.1.1 or http://homerouter.cpe. You normally access the router's interface. The username and password are marked on the back of the appliance (admin/admin). After you log in, the interface asks you to change your password.
(Remember, you must be at home and connected to your home WiFi to do this.)
If you change your user name/password for the Huawei B593s-22 4G and forget them, you don't need to turn your breath up to as you can reset the Huawei B593s-22 4G router clip for about 15 seconds by simply holding down the reset button.
Then go to the Internet (top menu) and then to PIN Management (left menu). Enter the PIN in PIN and confirm. Then return to Home/Quick Setup to quickly configure your modem. Consider roaming, especially with other carriers.
How to Upgrade the B593S-22
You can upgrade the B593S-22 in any of the following ways:
Local Update
To successfully perform the local upgrade, connect the CPE to your computer or a network cable over Wi-Fi, save the upgrade file on the computer, and ensure that the CPE is not connected to any device other than the power adapter and computer.
To perform a local upgrade, perform the following steps:
Choose Home > Update.
In the Local Update area, click Browse
In the displayed dialog box, select the target software version file.
Click Open.
The dialog box closes. The save path and name of the target software version file are displayed in the Update file field.
Click Update.
Click OK.
The software upgrade starts. After the upgrade, the CPE automatically restarts and runs the new software version
Online update
To successfully perform an online upgrade, ensure that the CPE is connected to the Internet. To perform an online upgrade, perform the following steps:
Choose Home > Update.
Click Check to detect the latest version.
(After updates are found, the CPE retains the server address and informs you if any subsequent updates are found on the server.)
Click Update to download the updates.
After downloading the updates, the CPE automatically upgrades and restarts.
A message is displayed, indicating that the upgrade is complete. Then, the login dialog box is displayed.
Updating Using CWMP
To update the CPE software using the CPE WAN Management Protocol (CWMP), perform the following steps:
Choose Home > Update.
Click CWMP Update.
Note
Currently, the device is automatically upgraded when a new version is detected. If the automatic upgrade is disabled, a message is displayed indicating the new version.
Download Firmware for B593
The latest firmware for the B593 can be downloaded in the attachment of the post.
Hope it can help you!
Thank you!
