downgrade AP6050DN from V2R9 to v2r8 fail

Torrent · Created Dec 29, 2018 03:30:23

For new AP models in V200R009C00SPC300 andearlier versions of V200R009, upgrade the APs to V200R9C00SPC600 or later, andthen downgrade the APs to the following versions as required:

l V200R007C10SPCc00 and later V200R007C10 versions

l V200R007C20SPCh00 and later V200R007C20 versions

l V200R008C10SPCa00 and later V200R008C10 versions

For the upgrade and downgrade methods, seethe upgrade guide:

https://support.huawei.com/enterprise/en/bulletins-product/ENEWS2000002551

thanks for sharing

lizhi94 · Created Dec 29, 2018 03:43:07

The flash model and capacity of the new models AP6050DN and AP6150DN are changed, and are not supported byearlier software versions.

https://support.huawei.com/enterprise/en/bulletins-product/ENEWS2000002551

Finn92 · Created Dec 29, 2018 05:59:34

the solution is Downgrade the new hardware devices to V200R007C20SPCh00, or V200R008C10SPCa00 and their later versions.
For V200R009C00SPC300 and earlier versions, upgrade the AP version to V200R9C00SPC600, and then downgrade the AP.

No.9527 · Created Dec 29, 2018 07:00:41

If a device is upgraded from V200R003 or V200R005 to V200R006 or a later version, the AP configuration will be lost. To prevent configuration loss, convert the configuration file of V200R003 or V200R005 to the configuration file of V200R006 using eDesk before the upgrade. Upload the configuration file of V200R006 and specify it as the startup file after the upgrade or re-configure the device after the upgrade. For details on how to use eDesk, see C Appendix C.
The configuration file of V200R005 can be directly converted to the configuration of V200R006 using eDesk.
To convert the configuration file of V200R003 to the configuration file of V200R006, first upgrade the device in V200R003 to V200R005. After that, run the save command in the user view to obtain the configuration file of V200R005, and use eDesk to convert it to the configuration file of V200R006.

yjhd · Created Dec 29, 2018 08:13:24

The flash model and capacity of the new models AP6050DN and AP6150DN are changed, and are not supported byearlier software versions.

Okka · Created Dec 30, 2018 11:01:35

Good work

downgrade AP6050DN from V2R9 to v2r8 fail

【Problem Description】

【Problem Analysis】

【Root Cause】

【Solution Description】

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

downgrade AP6050DN from V2R9 to v2r8 fail

【Problem Description】

【Problem Analysis】

【Root Cause】

【Solution Description】

Third Party’s Trade Secret

My Followers