Dorado3000 V3 iSCSI storage and HyperMetro

Hi!

I'm involved in a proyect with 2 Dorado3000 V3 for serving LUNs vía iSCSI to VMWARE for VMs and one LUN in HyperMetro between 2 Datacenters.

Focusing in one datacenter, the networking department has configured 4 * 25GB ethernet ports on their switches, supposedly two 25G links per controller and they have proposed to me use them for iSCSI service and HyperMetro replication, each service separate in one VLAN and al ports in LACP.

For me this scenario is new, I have always configure this with dedicated ports.

I have several doubts of concept and I would appreciate if someone can answer:

*    Does iSCSI can configure as port bindig and support logical port? (if I configure IP on LP it's look like iSCSI doesn't work)

*    Can I share the ports for iSCSI and HyperMetro Service?

I don't know if my plan is correct but if we have 4 * 25G Ports, 2 per controller. For example Port A of each controller are for iSCSI and port B of each controlle are for HyperMetro service. But without LACP. Can it be a valid scenario?

Thanks