Problem description
Dorado5000 V3 Management port status changes as bit errors are found.
Problem analysis
Check the storage log as per below:
The system will query the port bit errors and set 1 min as one cycle.
The system continuously queries for 6 cycles. If more than 10 error increments for each 6 cycles, the port will be set as the bit errors are found; if the increase of error code is less than 6 for each cycle, the port status will set as normal.
So the port status changes in real time.
If the port status shows that bit errors are found, it shows more than 10 error increments every minute on that port.
