Does the GE Optical LPU of the S12700 Support 100M Optical Module?

p00187531 · Created Jul 1, 2016 09:30:02

Yes, the S12700's GE optical LPU supports both 100M optical modules and 1000M optical modules.

When a 100M optical module is used, you must run the speed 100 command on the interface to set the interface rate to 100 Mbit/s.

When using a GE optical module, an interface works at 1000 Mbit/s by default. If auto-negotiation is enabled on the interface, the interface speed cannot be set to 100 Mbit/s. If auto-negotiation is disabled, you can run the speed 100 command to set the interface speed to 100 Mbit/s.

When two optical interfaces are interconnected, they must use the same type of optical module.

raquelaran · Created May 1, 2020 11:12:46

thank you for sharing

raquelaran · Created May 1, 2020 11:12:54

amazing job

Does the GE Optical LPU of the S12700 Support 100M Optical Module?

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

Does the GE Optical LPU of the S12700 Support 100M Optical Module?

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers