Do we need to configure the access switch port connected to clients to be edge-p

Latest reply: May 19, 2016 06:15:54 1193 2 0 0

Laterly, I have met the situation that need to configure the access switch port connected to clients, someone told me like that:

For the access layer, if the port of access switch connect to clients, we should configure it with (for example the interface 0/0/8):

stp enable

interface gigabitEthernet 0/0/8

stp edge-port enable

also, in order to avoid root arguing when expand capacity later, we need to configure the  core-switch of layer 2 as "STP root primary"

Do we need to configure this way?

  • x
  • convention:

Created May 19, 2016 06:15:54 Helpful(0) Helpful(0)

Reply 2 #

Got it, Thank you !

  • x
  • convention:

Created May 18, 2016 06:44:10 Helpful(0) Helpful(0)

yes, it's necessary, BTW, bpdu-protection is also needed
  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits