Symptom
The GPU is configured.
Troubleshooting
Step 1 Check the vna-worker.log log of the CNA node. The result shows that the vGPU device path fails to be queried and the message "No such file or directory" is displayed.
Step 2 Check whether the file exists in the corresponding directory of the host. The result shows that the file does not exist.
Conclusion
FusionCompute supports only the GPU driver of 6.2.
To determine that the correct GPU driver is installed on the CNA node, perform the following steps:
Run the nvidia-smi command on the host to query information about the driver.
Log in to the official NVIDIA website to check the mapping between the driver version and GPU version.
