disk domain's "Running Status" still display "Balancing"

Created: Aug 16, 2019 09:57:21Latest reply: Aug 17, 2019 07:20:17 128 3 1 4
  Rewarded Hi-coins: 1 (problem resolved)

I need to upgrade storage firmware, but one of disk domain's "Running Status" still display "Balancing", what should I do?

  • x
  • convention:

Featured Answers
jors
Created Aug 16, 2019 11:06:36 Helpful(4) Helpful(4)

Hi!

You can log in to the storage via the CLI mode, then enter the 'developer' mode to stop the balancing status.

Step 1. Change disk_domain pause_schedule_leveling time=<hour>  

'hour means how long you want to pause the schedule'

Step 2. Change disk_domain leveling disk_domain_id=<ddID> tier_id=<tier> action=<switch>

'ddID means which disk domain you want to stop; tier_id= which disk tier to stop; action means to stop or on'

'For the above operation, you need to confirm the disk_domain's work controller which you want to stop. if you do know the disk domain's work controller, you can run these commands on all the controllers".
  • x
  • convention:

%E5%8E%9A%E7%A7%AF%E8%96%84%E5%8F%91
All Answers
jors
jors Created Aug 16, 2019 11:06:36 Helpful(4) Helpful(4)

Hi!

You can log in to the storage via the CLI mode, then enter the 'developer' mode to stop the balancing status.

Step 1. Change disk_domain pause_schedule_leveling time=<hour>  

'hour means how long you want to pause the schedule'

Step 2. Change disk_domain leveling disk_domain_id=<ddID> tier_id=<tier> action=<switch>

'ddID means which disk domain you want to stop; tier_id= which disk tier to stop; action means to stop or on'

'For the above operation, you need to confirm the disk_domain's work controller which you want to stop. if you do know the disk domain's work controller, you can run these commands on all the controllers".
  • x
  • convention:

%E5%8E%9A%E7%A7%AF%E8%96%84%E5%8F%91
jors
jors Created Aug 16, 2019 11:07:48 Helpful(1) Helpful(1)

this just for the V300R001C20、V300R002C10SPC200、V300R003C10SPC100 and later version
  • x
  • convention:

%E5%8E%9A%E7%A7%AF%E8%96%84%E5%8F%91
Junmin
Junmin Created Aug 17, 2019 07:20:17 Helpful(1) Helpful(1)

better to wait the disk doamin balance task finished, then start the storage version upgrade
if you don't want to wait, you can also using the commands to pause the balance task, but notice that the pause time should more than the time you need to upgrade the storage , better to set it as 24 hours.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login