Different error disabled Log(Port-security and others)

Hi Seyed,
Please wait patiently. Our engineers are looking for answers to your questions.

Hi Seyed,
Do you want to view alarms related to port security?

Hi DDSN
Yes
and also Alarm of BPDUGUARD and etc.
in General Alarm Of Syslog in my syslog server for all Security Level.
I Config that (port security , BPDU Guard, and syslog in switch)but it dose not send all of Alarm and error disable to my syslog server and also cant not see the in switch both 2700 series and 5720 series
Is it is possible write the config commands and also show the results
thanks

Hi Seyed,
Trap information is a notification generated when the system detects a fault and records system status information such as faults.
According to your description, you need to configure the output traps to the log host so that you can view traps on the log host.
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100126530&id=EN-US_TASK_0177101493&lang=en

You can also configure the switch to output trap information to the trap buffer. In this way, you can run the display trapbuffer command on the switch to view trap records.
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100126530&id=EN-US_TASK_0177101489&lang=en

Thanks
Could you please show me the Out put?

You know I Configure my port security and syslog
But I only see that the port is down or up, It dose not show that which mac address try to connect to the port and other information that I see in Cisco SWs...
I also can not see the logs in SW it only show the port is down!!! also have OID ... Nothing else

Good answer! Congrats