Differences between ODU timeslot configuration modes

Hello, friend!

Automatically random indicates that they accessed services can be mapped across levels. For example, ODU0-ODU2 and ODU1-ODU2. 

Cross-layer mapping reduces mapping layers and levels, simplifies the relationship between customers and the service layer, and facilitates management. 

Cross-level mapping allows for more flexible bandwidth utilization. For example, after seven 1.25 Gbit/s timeslots of an ODU2 channel are occupied by ODUs, the remaining 1.25 Gbit/s bandwidth can be used through ODU0-ODU2 cross-layer mapping. 

Auto-continuous indicates that the accessed services are mapped from low level to high level. Example: ODU0-ODU1-ODU2 

You are advised to set this parameter to Automatic Random. 

When two line boards are interconnected on the WDM side, ODU Timeslot Configuration Mode must be set to the same value.

Thanks!