Got it
Huawei Enterprise Support Community
Community Forums Wireless & Microwave
Diameter Route Status-FAU...

Diameter Route Status-FAULTY

Created: Sep 26, 2020 08:49:33Latest reply: Oct 3, 2020 03:23:23 623 3 0 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#

The eSCN Diameter Route Status faulty.

I set up the following parameters:


 Route Index  =  0
 Application Name  =  S6a
 Default Route Flag  =  NO
 Mode  =  SELMODE_MASTER_SLAVE
Peer Entity Realm Name  =  tdhss.com
 Peer Entity Index  =  0
  Route Name  =  RX


the tdhss.com is set up on eUDC ... what could be the problem?

Localhostname= tdhss.com

Local Entity Domain  Name=com

Port=22211

Like (0) Dislike (0) Favorite(0) Share Report
Previous: Version mapping
Next: Marocco
Featured Answers

Recommended answer

(1) (0)
BetterMing
Created Sep 26, 2020 08:59:10

Hello, dear.

You can refer to the following information

ALM-80592 Diameter Route Invalid

Description

This alarm is generated when the mobility management entity (MME) cannot send messages to all the Diameter peers in the destination realm if the route to the next-hop Diameter peer in the destination realm is unavailable. This alarm is cleared when the route to the next-hop Diameter peer in the destination realm is available.

Attribute

Alarm IDAlarm SeverityAuto Clear
80592MajorYes

Parameters

NameMeaning

Route index

Indicates the index of the Diameter route.

Route name

Indicates the name of the Diameter route.

Destination entity realm name

Indicates the name of the destination entity realm.

RU Name

Indicates the name of the virtual machine for which the alarm is generated

Process Type

Indicates the type of the process for which the alarm is generated. The process can be:

  • SPP

Process No.

Identifies the process for which the alarm is generated.

Fault Cause

Indicates the cause value of the fault.

The cause value can be:

  • USER_DISCONNECT

  • REL_FROM_NET

  • DWR_NO_ANSWER

  • REC_STATUS_INDICATION

  • CM_SMOOTH

  • REC_DPR

  • REC_STATUS_ANSWER

  • REC_DEVICE_MES

  • PARSE_ERR

  • RECV_MAX_DATA

  • DELETE_CONN

  • MODIFY_CONNGRP

  • MODIFY_ROUTE

  • DELETE_ROUTE

  • USER_RESTART

  • DWR_SEND_FAILURE

  • RM_SMOOTH

  • CONN_REBOOTING

  • RECV_DWR_FORM_UNKNOWNPE

  • FAL_IN_OPEN_ST

  • RECV_NON_CEA

  • PRO_CEA_FAILED

  • SES_STATE_CHG

  • CREATE_TRANS_CONN_FAIL

  • CREATE_CONN_TIMEOUT

  • CONN_ESTABLISH_FAILURE_NACK

  • RECV_CEA_TEMPORARY_FAILURE

  • WAIT_I_CEA_TIMEOUT

  • SEND_CER_FAILED

  • RECV_PEER_DISC_IN_WAIT_I_CEA_STATE

  • TLS_DEL_CONN_FAILURE

  • TLS_CLOSING_STATE_TIME_OUT

  • SUSPECT_RCV_MSG

  • REOPEN_RCV_DWA_MSG

  • OPEN_TO_SUSPECT

  • RCV_TOO_BUSY_RSP

  • CONFIG_UPDATE

  • CAUSE_BUTT

Impact on the System

The MME cannot send messages to the peer entity and services related to the peer entity are interrupted.

Possible Causes

  • The Diameter link is abnormal.

  • The peer entity in the destination realm is faulty.

  • The Diameter route is Down.

Procedure

  1. In the MML Command - OMO_VNFC window, run DSP DMPE to check the status of the next-hop Diameter peer in the destination realm.



In the MML Command - OMO_VNFC window, run DSP DMRT to check the status of the Diameter route.



Check whether the alarm ALM-80593 Diameter Peer Down is generated.



Contact technical support to require the cause value of the fault if link oscillation occurs after the fault is rectified.

Contact technical support.


View more
  • x
  • convention：
All Answers
(1) (0)
2#
DDSN
DDSN Admin Created Sep 26, 2020 08:51:08

Hi Ingwe001,
Please wait patiently. Our engineers are looking for answers to your questions.
View more
  • x
  • convention：
(1) (0)
3#
BetterMing
BetterMing Created Sep 26, 2020 08:59:10

Hello, dear.

You can refer to the following information

ALM-80592 Diameter Route Invalid

Description

This alarm is generated when the mobility management entity (MME) cannot send messages to all the Diameter peers in the destination realm if the route to the next-hop Diameter peer in the destination realm is unavailable. This alarm is cleared when the route to the next-hop Diameter peer in the destination realm is available.

Attribute

Alarm IDAlarm SeverityAuto Clear
80592MajorYes

Parameters

NameMeaning

Route index

Indicates the index of the Diameter route.

Route name

Indicates the name of the Diameter route.

Destination entity realm name

Indicates the name of the destination entity realm.

RU Name

Indicates the name of the virtual machine for which the alarm is generated

Process Type

Indicates the type of the process for which the alarm is generated. The process can be:

  • SPP

Process No.

Identifies the process for which the alarm is generated.

Fault Cause

Indicates the cause value of the fault.

The cause value can be:

  • USER_DISCONNECT

  • REL_FROM_NET

  • DWR_NO_ANSWER

  • REC_STATUS_INDICATION

  • CM_SMOOTH

  • REC_DPR

  • REC_STATUS_ANSWER

  • REC_DEVICE_MES

  • PARSE_ERR

  • RECV_MAX_DATA

  • DELETE_CONN

  • MODIFY_CONNGRP

  • MODIFY_ROUTE

  • DELETE_ROUTE

  • USER_RESTART

  • DWR_SEND_FAILURE

  • RM_SMOOTH

  • CONN_REBOOTING

  • RECV_DWR_FORM_UNKNOWNPE

  • FAL_IN_OPEN_ST

  • RECV_NON_CEA

  • PRO_CEA_FAILED

  • SES_STATE_CHG

  • CREATE_TRANS_CONN_FAIL

  • CREATE_CONN_TIMEOUT

  • CONN_ESTABLISH_FAILURE_NACK

  • RECV_CEA_TEMPORARY_FAILURE

  • WAIT_I_CEA_TIMEOUT

  • SEND_CER_FAILED

  • RECV_PEER_DISC_IN_WAIT_I_CEA_STATE

  • TLS_DEL_CONN_FAILURE

  • TLS_CLOSING_STATE_TIME_OUT

  • SUSPECT_RCV_MSG

  • REOPEN_RCV_DWA_MSG

  • OPEN_TO_SUSPECT

  • RCV_TOO_BUSY_RSP

  • CONFIG_UPDATE

  • CAUSE_BUTT

Impact on the System

The MME cannot send messages to the peer entity and services related to the peer entity are interrupted.

Possible Causes

  • The Diameter link is abnormal.

  • The peer entity in the destination realm is faulty.

  • The Diameter route is Down.

Procedure

  1. In the MML Command - OMO_VNFC window, run DSP DMPE to check the status of the next-hop Diameter peer in the destination realm.



In the MML Command - OMO_VNFC window, run DSP DMRT to check the status of the Diameter route.



Check whether the alarm ALM-80593 Diameter Peer Down is generated.



Contact technical support to require the cause value of the fault if link oscillation occurs after the fault is rectified.

Contact technical support.


View more
  • x
  • convention：
(2) (0)
4#
ethanbrown
ethanbrown Created Oct 3, 2020 03:23:23

thanks for share it with us!
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.