design switch with mlag and active active vrrp with 2 device.

Latest reply: Dec 28, 2018 08:43:33 594 2 0 0
Hello,
can i design switch with mlag and active active vrrp with 2 device and for the vrrp using subnet /30 with one admin vrrp.

Br.
Manaschai
  • x
  • convention:

Argentym
Created Aug 12, 2018 15:33:51 Helpful(2) Helpful(2)

Hello Hatman,

You have two ways:
1.Create a VRRP group on VLANIF interfaces and configure the same virtual IP address and virtual MAC address for VLANIF interfaces corresponding to M-LAG member interfaces of M-LAG master and backup devices.
2.Configure the same IP address and run the mac-address command to configure the same virtual MAC address for the VLANIF interfaces.

SW-A
interface Vlanif10
ip address 10.2.1.1 255.255.255.252
vrrp vrid 1 virtual-ip 10.2.1.1
mac-address 0000-5e00-0101
SW-B
interface Vlanif10
ip address 10.2.1.1 255.255.255.252
vrrp vrid 1 virtual-ip 10.2.1.1
mac-address 0000-5e00-0101

Check this links:
1:
http://support.huawei.com/hedex/ ... 253C%252Fb%253E
2:
http://support.huawei.com/hedex/ ... 253C%252Fb%253E This post was last edited by Argentym at 2018-08-12 15:45.
  • x
  • convention:

4am
Created Dec 28, 2018 08:43:33 Helpful(0) Helpful(0)

Or you can stack two switches if the switch supports stacking.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login