Delete the icmp receive command

Hi,

This command is a three-state command and cannot be deleted using the undo command. The three states are as follows:

1. Enable the function, that is, the packet can be sent.
2. Disable the function, That is, packets cannot be sent on the interface.
3. Whether an interface can send the packet depends on the global configuration(default status).

So to restore the default configuration, you should use the icmp name redirect receive  inherent-global command.

For details, see https://support.huawei.com/hedex/hdx.do?docid=EDOC1100168821&id=EN-US_CLIREF_0298913040&lang=en